Most Recent Blog Posts
-
Pazzle
- From: Haze
-
Description:
I am enjoying working with the pazzle, especially the welded lettering. At the moment I occasionally have a problem with it seeming to slip or jam, and not cut the word correctly. Yesterday it cut my two names and 'happy' in different sizes but wouldn't cut 'Anniversary' properly. I tried different sizes and different areas on the page but with no success. Any suggestions?
- Blog post
- 1 year ago
- Views: 155
- Not yet rated
-
selling
- From: bill
-
Description:
hi I purchased a pazzel from oyster stamps at the edinburgh show in july this year i purchesed it on impulse and i just dont have time to fully understand it and use it i have used it abot 6 times to do some numbers it comes with Pazzles Inspiration Electronic Cutter and Inspiration Embossing Tool & Mat and Inspiration Pen Tool all the goods are just as i purchased them it all cost over £500.00 would sell for £350.00 inc delivery contact bill at Jayceecoms@aol.com
- Blog post
- 1 year ago
- Views: 174
- Not yet rated
-
All done for now
- From: eeyorelady
-
Description:
Yep daytime ones finished, in fact I got mine through the post today lol how bizaare is that? receiving an invite I have made - least I got it for my portfolio lol
Have also had a phonecall from my aunt to say how lovely they are as she received hers today too
Hope they are all well thought of!
I can breathe again now
- Blog post
- 1 year ago
- Views: 163
- Not yet rated
-
Haze
- From: Haze
-
Description:
Just joined the website and am experimenting to see what happens. Bought the Pazzle at the Bolten Craft Fayre, then immediately went on holiday on return home. Could only take the instruction book, which I read through. I've been playing on the Pazzle on my return and am now working on chapter 9. Enjoying it so far.
Haze
- Blog post
- 1 year ago
- Views: 134
- Not yet rated
-
phew
- From: eeyorelady
-
Description:
well have finished the evening invites. Doing the eyelets was the worse part to be honest..have done some much simpler invites too just for my brother to give to those who will pop along for a short time and a drink
Just got to finish the 40 day ones now, and then once they all behanded out and the RSVP's have come back, I will know how many I got to do for the second batch
In the meantime I have an order for some 1st birthday invites to do, and Hen night invites!
busy busy busy
- Blog post
- 1 year ago
- Views: 101
- Not yet rated
-
first pad
- From: eeyorelady
-
Description:
Is finished! Yep have done the first 36 pages, only bodged up 3 as well so am very pleased!
Going to start on the next pad tomorrow
I done 11 tonight so I thought that was good going.
- Blog post
- 1 year ago
- Views: 149
- Not yet rated
-
Wedding Invites
- From: eeyorelady
-
Description:
Ok, so a blog is like a diary...well it is a diary! So lets practise with this and do a blog of the wedding invites.
So I have 200, yes 200 invites to make for my brothers wedding which is on 6th Sept, altho they would of course like the invites - YESTERDAY! well, I have done so far...drum roll please.....21
Yep 21....I not sure what the design is, it is a double sided 12x12 sheet, cut it in half - tri-fold each piece then one piece fold corner to middle on all 4 corners. which creates a sort of pop up effect, using double sided tape tape the ends and the middle to the other piece of card, this will make pockets top and bottom on the folds
Looks stunning, will upload pics at some point.
So far so good have only messed up one sheet of paper!
will update again soon x
- Blog post
- 1 year ago
- Views: 241
- Not yet rated
-
HELLO!!
- From: linda
-
Description:
HI,
I haven't a clue what I'm doing or if Im in the right place or not, but I just want to say hello.
I'm fairly new to crafting and computers so its going to take a while to get ysed to all this. Any tips on using this site for a start? (yes, I really am that thick!).
Linda x
- Blog post
- 1 year ago
- Views: 116
- Not yet rated
-
Pazzle
- From: oyster
-
Description:
Hi
If anybody already owns a Pazzle i would love you to come on this forum, and tell us how you are getting on with it.
I know there are lot of people out there that are interested in you options.
I love it, and think it will be the next best thing in the craft industry, what do you think?
- Blog post
- 1 year ago
- Views: 592
- Not yet rated