Revised Settings For Cutting

This is a GUIDE to help you get close to the settings for cutting on the Inspiration. It is by no means hard and fast, you will have to tweek it for yourself since humidity and brands of material can make a difference. This is an ongoing project so I will add information as it becomes available. If you have settings to add please post them here, I will attempt to confirm your settings and then post them in the guide.

INSPIRATION PRESSURE GUIDE
(in Alphabetical Order)

Acrylic: .02mm thick
Passes: 3-4
Blade Length: 3, 4 ½, 6
Pressure: 35
Speed: 2

Bazzil Textured Cardstock
Passes: 1
Blade Length: 2.5
Pressure: 18
Speed: 3

Cardstock Medium Weight Smooth: (tested on Worldwin Colormates)
Passes: 1
Blade length: 2
Pressure: 18
Speed: 4

Cardstock Medium to Heavy Textured: (tested on Worldwin Treasures)
Passes: 1
Blade Length: 2 ½
Pressure: 18
Speed: 4

Core'dinations Cardstock
Passes: 1
Blade Length: 3.5
Pressure: 15
Speed: 3

Chipboard: 2mm thick
Passes: 3-4
Blade Length: 3, 4 ½, 6
Pressure: 35
Speed: 2
Mat: Cutting mat with painters tape on edges

Paper Lightweight: (tested on K&Company Patterned Paper)
Passes: 1
Blade Length: 2
Pressure: 12
Speed: 3

Felt: 1.75mm thick
Passes: 1
Pressure: 40
Blade Length: 5
Speed: 2
Mat: Fabric Mat

Stamp Material by Pazzles:
Passes: 1
Blade Length: 3 1/2 for thick material 2 1/2 for thin material
Pressure: 35
Speed: 3

Stencil Plastic: (tested on Pazzles Stencil Plastic)
Passes: 1
Blade Length: 2
Pressure: 30
Speed: 2

Sticker Paper: (tested on Pazzles Sticker Paper)
Passes: 1
Blade Length: 1 ½
Pressure: 15
Speed: 4

Transparency Plastic
Passes: 1
Blade Length: 1.5
Pressure: 25
Speed: 1 - 3 depending on image

Vinyl
Passes: 1
Blade Length: 1 ½
Pressure: 13
Speed: 3

Thanks Tracey for guide as i am still testing my scraps of card and paper for correst pressure setting KAren